Deletions:
Revision [501]
Edited on 2010-01-28 22:13:53 by YuriDario [Release 1.4: Added new setup test feature in settings. Modified threshold for no movement detection.]Additions:
Setup example (//How to recognize a device on the table//): this will lock your device once it will be put on the table for at least 1 minute; enter g-Lock settings, click //Lock action// and select //Timed without move//. Click //Timeout delay// and select 1 minute delay. Set //Sensibility level// to 2 (medium high). Enable //Notify when ready// option. Under //Notification options// enable vibration. Now turn off the screen. Try moving the phone, the led should flash with a magenta color. Now put it on the table, the led should stop flashing after a while. Wait 1 minute (slightly more probably) and it should vibrate to notify you the lock action executed.
Testing configuration: with version 1.4 a new //Test lock setup options// has been added to settings; once the configuration is ready, you can use the test to verify if lock works as designed. You need to enable notification options to get feedback about locking. Once you get the notification, you can put screen off to test lock pattern. Click //OK// to terminate the test and restore locking status.
Testing configuration: with version 1.4 a new //Test lock setup options// has been added to settings; once the configuration is ready, you can use the test to verify if lock works as designed. You need to enable notification options to get feedback about locking. Once you get the notification, you can put screen off to test lock pattern. Click //OK// to terminate the test and restore locking status.
Deletions:
Additions:
The full version is now available for purchase on the Android Market.
==DEMO version limits==
The demo version has the following limits:
- the program will work for one week.
- the service is not automatically restarted after phone reboot.
- Android 2.0
<td><a href="/images/GLockHelp/sh1.png">
<td><a href="/images/GLockHelp/sh2.png">
<td><a href="/images/GLockHelp/sh3.png">
<td><a href="/images/GLockHelp/sh4.png">
==DEMO version limits==
The demo version has the following limits:
- the program will work for one week.
- the service is not automatically restarted after phone reboot.
- Android 2.0
<td><a href="/images/GLockHelp/sh1.png">
<td><a href="/images/GLockHelp/sh2.png">
<td><a href="/images/GLockHelp/sh3.png">
<td><a href="/images/GLockHelp/sh4.png">
Deletions:
<td><a href="http://web.os2power.com/images/GLockHelp/sh1.png">
<td><a href="http://web.os2power.com/images/GLockHelp/sh2.png">
<td><a href="http://web.os2power.com/images/GLockHelp/sh3.png">
<td><a href="http://web.os2power.com/images/GLockHelp/sh4.png">
==(section5)Release history==
2009-11-26 1.2.2 market release.
- Released to market.
2009-10-05 1.2 demo release.
- Added no lock options.
2009-09-28 1.1 demo release.
- Added direction movements.
2009-09-14 1.0.2 demo release.
- Added DE/NL translations.
2009-08-30 1.0.1 demo release.
- New startup wizard.
- Hero/Magic warning.
2009-08-27 1.0 demo release.
- Public release.
Additions:
The current available application is a demo, it will stop working on 31th December 2009. New features are planned for the full version.
2009-11-26 1.2.2 market release.
- Released to market.
2009-11-26 1.2.2 market release.
- Released to market.
Deletions:
Additions:
- Android 1.5, 1.6
~A) //No lock options// allows disabling locking:
~~1) //USB plugged// does not lock if you are connected to a PC using the USB cable;
~~1) //AC plugged// does not lock if you plugged the AC adapter.
2009-10-05 1.2 demo release.
- Added no lock options.
~A) //No lock options// allows disabling locking:
~~1) //USB plugged// does not lock if you are connected to a PC using the USB cable;
~~1) //AC plugged// does not lock if you plugged the AC adapter.
2009-10-05 1.2 demo release.
- Added no lock options.
Deletions:
Additions:
Setup example //How to recognize a device on the table//: this will lock your device once it will be put on the table for at least 1 minute; enter g-Lock settings, click //Lock action// and select //Timed without move//. Click //Timeout delay// and select 1 minute delay. Set //Sensibility level// to 2 (medium high). Enable //Notify when ready// option. Under //Notification options// enable vibration. Now turn off the screen. Try moving the phone, the led should flash with a magenta color. Now put it on the table, the led should stop flashing after a while. Wait 1 minute (slightly more probably) and it should vibrate to notify you the lock action executed.
~~~i) //(left,right,up,down,push,pull)// move phone in the direction. This is experimental code, and due to accelerometer design, it could be difficult to get an acceptable recognition for some movements. The phone must be held with the screen facing you, otherwise proper acceleration data cannot be analyzed.
2009-09-28 1.1 demo release.
- Added direction movements.
~~~i) //(left,right,up,down,push,pull)// move phone in the direction. This is experimental code, and due to accelerometer design, it could be difficult to get an acceptable recognition for some movements. The phone must be held with the screen facing you, otherwise proper acceleration data cannot be analyzed.
2009-09-28 1.1 demo release.
- Added direction movements.
Deletions:
Revision [307]
Edited on 2009-09-13 23:48:27 by YuriDario [g-Lock 1.0.2, Added German/Dutch translations.]Additions:
The current available application is a demo, it will stop working on 31th October 2009.
~~~i) //(left,right,up,down,push,pull)// move phone in the direction (not available in 1.0 version). This is experimental code, and due to accelerometer design, it could be difficult to get an acceptable recognition for some movements. The phone must be held with the screen facing you, otherwise proper acceleration data cannot be analyzed.
2009-09-14 1.0.2 demo release.
- Added DE/NL translations.
Herwig Bauerfeind - german translation
Elbert Pol - dutch translation
~~~i) //(left,right,up,down,push,pull)// move phone in the direction (not available in 1.0 version). This is experimental code, and due to accelerometer design, it could be difficult to get an acceptable recognition for some movements. The phone must be held with the screen facing you, otherwise proper acceleration data cannot be analyzed.
2009-09-14 1.0.2 demo release.
- Added DE/NL translations.
Herwig Bauerfeind - german translation
Elbert Pol - dutch translation
Deletions:
~~~i) //(left,right,up,down,push,pull)// move phone in the direction (not available in 1.0 version).
Revision [302]
Edited on 2009-08-30 22:34:19 by YuriDario [g-Lock 1.0.1, startup wizard, hero/magic warning.]Additions:
**WARNING**: If your device is one of these:
~HTC Hero;
~HTC Magic with latest firmware;
it is probable that accelerometer events are disabled while the screen is off, thus g-Lock force based events cannot work. This issue can affect also other devices based on same Android codebase. This is under investigation, please check [[http://code.google.com/p/android/issues/detail?id=3708 here]].
~- For devices like HTC Hero/Magic (and possibly others) accelerometer events are disabled while the screen is off, thus g-Lock force based events cannot work. This issue can affect also other devices based on same Android codebase.
2009-08-30 1.0.1 demo release.
- New startup wizard.
- Hero/Magic warning.
~HTC Hero;
~HTC Magic with latest firmware;
it is probable that accelerometer events are disabled while the screen is off, thus g-Lock force based events cannot work. This issue can affect also other devices based on same Android codebase. This is under investigation, please check [[http://code.google.com/p/android/issues/detail?id=3708 here]].
~- For devices like HTC Hero/Magic (and possibly others) accelerometer events are disabled while the screen is off, thus g-Lock force based events cannot work. This issue can affect also other devices based on same Android codebase.
2009-08-30 1.0.1 demo release.
- New startup wizard.
- Hero/Magic warning.
